EnglishViews: 9 Author: Site Editor Publish Time: 2019-04-10 Origin: Site
An upright chiller is easy to organize and smaller than a chest freezer, but it’s hard to move. When you need to move or travel, moving the upright freezer becomes important, and moving can be a stressful time. We all have to do this at some point. Can you transport upright chiller laying down?
Let me show you the perfect way to move the upright chiller.
1) Remove the upright chiller at least two hours before moving it to give it time to thaw.
2) If the coil is heavily frosted, unplug the power supply hours or even a day before moving.
3) Remove all items from the interior, including any pallets or shelves.
4) Unplug the power cord from the wall.
5) Take out all the food and clean the interior.
6) If the upright chiller will be in transit for more than a day, you may need to put a small bag of activated carbon (usually used in fish tanks) or a box of soda to absorb odors in the refrigerator.
7) Fixed loose items, such as grille, shelf, storage plate, ice tray, ice storage bucket, etc.
8) Cover and removable parts shall be protected with tape. This prevents them from loosening and causing damage. Be careful and easy.
9) Blanket protection should be used outside the upright chiller.
1) Close the doors in transit and tape them up.
2) If it takes more than 24 hours to move the upright chiller, consider placing an internal carbon filter to absorb odors.
3) Stick the plug to the back of the device to prevent it from falling off.
4) Tilt the vertical cooler to one side and slide onto a car.
5) Slide the car in as much as possible, and then put the upright chiller down.
6) Fasten the upright freezer to the car with a bungee rope.
Different upright chillers have different considerations:
1_ Top-of-the-line freezer model: place it on the opposite side of the hinge to keep the door closed.
2_ SxS: is placed on the side of the freezer. That door is unlikely to open.
3_ French doors and freezers: they must remain upright at all times, but they can tilt through the door and so on.
4_ Compact: these must always be upright. Due to the design of the drain pipe, the compact model should always be upright to prevent drainage from returning to the equipment unless the new out-of-the-box is used. If it must move sideways, close one day in advance and allow drainage.
5_Bid: if transported in vehicle, all refrigerator models must be upright under all circumstances. However, when placed on a car into the home, it can tilt backwards.
Tilt the device to the side of the cart as little as possible during transport. If you have to put the refrigerator aside, let it go through a door or a flight of stairs to minimize its side time.
After placing it in a new position, place the refrigerator upright and, if it is necessary to transport the side of the refrigerator, it should be erected at the same time as its side before it is inserted. If it is used on the side for more than one day, it stands 24 hours before running. If only a brief maintenance, cleaning, or adjustment is required, only a few minutes of residence time is required. Just plug in the power.
Through the above, can you now transport the Meibaijia's chiller laying down perfectly? Please note that strong vibration should be avoided as far as possible in the course of transportation.
May this article be helpful to you.
